EasyManua.ls Logo

Lexmark MS610de - Page 13

Lexmark MS610de
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Lift the green flap in front of the printer.
6 Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
7 Insert the imaging unit by aligning the arrows on the side rails of
the unit with the arrows on the side rails inside the printer, and
then insert the imaging unit into the printer.
8 Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9 Close the front door.
10 From the printer control panel, touch to clear the message
and continue printing. For nontouchscreen printer models, select
Next >
> Clear the jam, press OK > .
[x]page jam, open rear door. [20y.xx]
1 Open the front door.
2
1
2 Gently pull down the rear door.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
3 Firmly grasp the jammed paper on each side, and then gently pull
it out.
13

Other manuals for Lexmark MS610de

Related product manuals