• Load letterhead faceup with the top edge entering the printer
first. For two‑sided (duplex) printing, load letterhead facedown
with the bottom edge entering the printer first.
• Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5 From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper or specialty media loaded
in the multipurpose feeder.
Clearing jams
[x]‑page jam, open front door. [20y.xx]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching it.
1 Press the button on the right side of the printer, and then open the
front door.
2
1
2 Pull out the toner cartridge using the handle.
3 Lift the green handle, and then pull out the imaging unit from the
printer.
Warning—Potential Damage: Do not touch the shiny blue
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
4 Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
12
To Next Page
Loading...
