Supported paper sizes, types, and weights
The following tables provide information on standard and optional paper sources and the sizes, types, and weights of
paper they support.
Note: For an unlisted paper size, select the closest larger listed size.
Paper types and weights supported by the printer
The printer engine supports 60–176‑g/m
2
(16–47‑lb) paper weights.
Paper type 250‑ or 550‑sheet
trays
2100‑sheet tray Multipurpose feeder Duplex
Paper
Card stock X
Plain Envelope X X
Rough Envelope
X X
Paper labels
X X
Pharmacy labels
X
Transparencies* X X
* Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information, see
“Tips on using transparencies” on page 182.
Paper sizes supported by the printer
Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a
period of time to ensure the best print performance.
Paper size
1
Dimensions Standard or
optional 250‑ or
550‑sheet tray
Optional
2100‑sheet tray
Multipurpose
feeder
Duplex
A4 210 x 297 mm
(8.3 x 11.7 in.)
A5 148 x 210 mm
(5.8 x 8.3 in.)
2
A6 105 x 148 mm
(4.1 x 5.8 in.)
X
1
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes
that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not
available, then select Universal or turn off tray size sensing. For more information, contact customer support.
2
Paper is supported in long‑edge orientation.
3
Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length is
from 148 mm (5.83 in.) to 356 mm (14 in.).
Paper and specialty media guide 186
To Next Page
Loading...
Need help?
General
