How do I resolve 'Load [paper source] with [custom string] [orientation]' on my Lexmark MS711 Printer?
If your Lexmark printer displays a 'Load [paper source]' message, load the indicated tray or feeder with the correct size and type of paper. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the current job.
What to do if my Lexmark Printer says 'Memory full'?
If your Lexmark Printer displays a 'Memory full' message, you can try the following: First, press on the printer control panel to clear the message. If the problem persists, decrease the resolution setting or install additional printer memory.
How to fix 'Incorrect paper size, open [paper source]' on Lexmark Printer?
If your Lexmark printer displays an 'Incorrect paper size' message, try these steps: Load the correct size of paper in the tray. You can also press on the printer control panel to clear the message and print using a different tray. Check the tray length and width guides to ensure the paper is loaded properly. Also, verify that the correct paper size and type are specified in Print Properties, the Print dialog, or the Paper menu on the printer control panel. If the MP Feeder Size is set to Universal, ensure the paper is large enough for the data being printed. As a last resort, cancel the print job.
What to do if Lexmark MS711 Printer displays 'Change [paper source] to [custom string] load [orientation]'?
If your Lexmark printer displays a 'Change [paper source]' message, load the correct size and type of paper in the tray, and then press on the printer control panel. You can also cancel the print job.
What to do if my Lexmark MS711 Printer says 'Insufficient memory to collate job'?
If your Lexmark printer displays an 'Insufficient memory to collate job' message, you can press on the printer control panel to print the portion of the job already stored and begin collating the rest of the print job. You can also cancel the current print job.
What to do if there are 'Too many bins attached' to my Lexmark MS711?
If your Lexmark printer indicates 'Too many bins attached', turn off the printer, unplug the power cord, remove the extra bins, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on.
What to do if Lexmark Printer displays 'Incompatible output bin [x]'?
If your Lexmark printer displays an 'Incompatible output bin' message, remove the specified bin. Alternatively, you can press on the printer control panel to clear the message and continue printing without using the specified bin.
What to do if Lexmark MS711 Printer displays 'Incompatible tray [x]'?
If your Lexmark printer displays an 'Incompatible tray' message, remove the specified tray. Alternatively, you can press on the printer control panel to clear the message and continue printing without using the specified tray.
What to do if my Lexmark Printer says 'Unsupported disk'?
If your Lexmark printer displays an 'Unsupported disk' message, it means an unsupported disk has been inserted. Remove the unsupported disk and install a supported one.
What does 'Cartridge, imaging unit mismatch' mean on my Lexmark MS711 and how to fix it?
If your Lexmark printer displays a 'Cartridge, imaging unit mismatch' error, check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies. Change either the toner cartridge or the imaging unit, so that both are either MICR or non-MICR.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Operating Systems Supported | Windows, macOS, Linux |
| Print Technology | Laser |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 1.5 GB |
| Output Capacity | 250 sheets |
| Hard Drive | Optional |
| Energy Star Certified | Yes |
| Printer Type | Monochrome Laser |
| Connectivity | USB, Ethernet |
| Duplex Printing | Automatic |
| Print Languages | PostScript 3 |
| Dimensions (W x D x H) | 15.7 x 17.5 x 15.7 inches |
To Next Page
