Stapler door close limit switch removal
1 Remove the stapler left cover. See “Stapler left cover removal” on page 630.
2 Remove the stapler right cover. See “Stapler right cover removal” on page 624.
3 Remove the stapler top cover. See “Stapler top cover removal” on page 635.
4 Remove the four screws (A) securing the stapler carriage frame.
5 Disconnect the cables (B) from the stapler carriage assembly.
6 Lift the stapler carriage frame, then remove the two screws from the stapler carriage assembly (C).
4063
Repair information
626
To Next Page
Loading...
