Lexmark MS711 - Output Expander Diverter Motor Removal; Output Expander Diverter Plunger Assembly Removal

Output expander diverter motor removal
1 Remove the output expander left cover. See “Output expander left cover removal” on page 560.
2 Disconnect the motor cable, and then remove the two screws (A) securing the motor.
3 Pull the motor off the device, and remove.
Output expander diverter plunger assembly removal
Diverter plunger removal
1
Remove the output expander left cover. See “Output expander left cover removal” on page 560.
2 Remove the seven screws (A) from the frame.
4063
Repair information
568