Maintenance kit low, 0 estimated pages remain [80.3x]
1 Replace the maintenance kit. For more information, see the instruction sheet that came with the replacement parts.
2 If you do not have a maintenance kit, then see “Replacing fuser maintenance kits” on page 794, or see the
Ordering a maintenance kit section of the User’s Guide, or visit www.lexmark.com.
Note: The printer is not intended to continue past this point [80.3x]. If a maintenance kit cannot be installed at this
time, contact the Lexmark help desk for procedures to allow the printer to continue printing for a limited number of
additional pages. For the contact information, visit http://support.lexmark.com.
Maintenance kit very low, 0 estimated pages remain [80.4x]
1 Replace the maintenance kit. For more information, see the instruction sheet that came with the replacement parts.
2 If you do not have a maintenance kit, then see “Replacing fuser maintenance kits” on page 794, or see the
Ordering a maintenance kit section of the User’s Guide, or visit www.lexmark.com.
Note: The printer is not intended to continue past this point [80.4x]. There are no additional procedures that will
allow the printer to print without installing a maintenance kit.
Replacing fuser maintenance kits
The operator panel displays the message 80 “Replace maintenance kit” at required maintenance intervals. You must
replace the fuser, transfer roller, pick roller, and separation roller at this interval to maintain the print quality and
reliability of the printer. The following fuser maintenance kits are available:
Description Part number Maintenance interval
MS81x Return Program Fuser Maintenance Kit Type 00, 110-120V Letter 40X8420 200K
MS81x Return Program Fuser Maintenance Kit Type 01, 220-240V A4 40X8421 200K
MS81x Return Program Fuser Maintenance Kit Type 02, 100V A4 40X8422 200K
MS81x Return Program Fuser Maintenance Kit Type 03, 110-120V A4 40X8423 200K
MS81x Return Program Fuser Maintenance Kit Type 04, 220-240V Letter 40X8424 200K
MS81x Fuser Maintenance Kit Type 05, 110-120V Letter 40X8425 200K
MS81x Fuser Maintenance Kit Type 06, 220-240V A4 40X8426 200K
MS81x Fuser Maintenance Kit Type 07, 100V A4 40X8427 200K
MS81x Fuser Maintenance Kit Type 08, 110-120V A4 40X8428 200K
MS81x Fuser Maintenance Kit Type 09, 220-240V Letter 40X8429 200K
MS71x Return Program Fuser Maintenance Kit Type 11, 110-120V 40X8530 200K
MS71x Return Program Fuser Maintenance Kit Type 13, 220-240V 40X8531 200K
MS71x Return Program Fuser Maintenance Kit Type 15, 100V 40X8532 200K
MS71x Fuser Maint. Kit Type 17, 110-120V 40X8533 200K
MS71x Fuser Maint. Kit Type 19, 220-240V 40X8534 200K
MS71x Fuser Maint. Kit Type 21, 100V 40X8535 200K
After replacing the maintenance kit, the maintenance count will automatically be reset to zero to clear the 80 “Replace
maintenance kit” message.
4063
Maintenance
794
To Next Page
Loading...
