HCOE bin full flag removal
1 Remove the HCOE top cover. See “HCOE top cover removal” on page 584.
2 Remove the HCOE sensor cover. See “HCOE sensor cover removal” on page 586.
3 Remove the two screws (A), and then remove the bin full flag.
Sensor (HCOE media bin full) with flag removal
1 Remove the HCOE sensor cover. See “HCOE sensor cover removal” on page 586.
2 Remove the two screws (A) securing the sensor brace.
3 Disconnect the cable (B), and remove the sensor with flag.
4063
Repair information
587
To Next Page
Loading...
