What to do if Lexmark MS710 displays 'Insufficient memory to support Resource Save feature'?
If your Lexmark printer displays 'Insufficient memory to support Resource Save feature', you can press on the printer control panel to disable Resource Save, clear the message, and continue printing. Alternatively, you can install additional printer memory.
How to fix 'Incorrect paper size, open [paper source]' on Lexmark Printer?
If your Lexmark printer displays an 'Incorrect paper size' message, try these steps: Load the correct size of paper in the tray. You can also press on the printer control panel to clear the message and print using a different tray. Check the tray length and width guides to ensure the paper is loaded properly. Also, verify that the correct paper size and type are specified in Print Properties, the Print dialog, or the Paper menu on the printer control panel. If the MP Feeder Size is set to Universal, ensure the paper is large enough for the data being printed. As a last resort, cancel the print job.
What to do if Lexmark MS710 Printer displays 'Load staples'?
If your Lexmark printer is showing a 'Load staples' message, you should replace or insert the specified staple cartridge in the finisher. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the print job.
What to do if Lexmark Printer displays 'Change [paper source] to [custom string] load [orientation]'?
If your Lexmark printer displays a 'Change [paper source]' message, load the correct size and type of paper in the tray, and then press on the printer control panel. You can also cancel the print job.
How do I resolve 'Load [paper source] with [custom string] [orientation]' on my Lexmark MS710 Printer?
If your Lexmark printer displays a 'Load [paper source]' message, load the indicated tray or feeder with the correct size and type of paper. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the current job.
What to do if my Lexmark Printer says 'Unsupported disk'?
If your Lexmark printer displays an 'Unsupported disk' message, it means an unsupported disk has been inserted. Remove the unsupported disk and install a supported one.
What to do if Lexmark MS710 Printer displays 'Incompatible tray [x]'?
If your Lexmark printer displays an 'Incompatible tray' message, remove the specified tray. Alternatively, you can press on the printer control panel to clear the message and continue printing without using the specified tray.
What to do if Lexmark MS710 Printer displays 'Insert hole punch box'?
If your Lexmark printer displays an 'Insert hole punch box' message, insert the hole punch box into the finisher and then press on the printer control panel to clear the message.
Why do 'Vertical voids appear on prints' from my Lexmark Printer and how to fix it?
If vertical voids appear on prints from your Lexmark printer, make sure your software program is using a correct fill pattern. From the printer control panel, set the paper type and weight in the Paper menu to match the paper loaded in the tray. Check if you are using a recommended type of paper. Redistribute the toner in the imaging unit by removing the toner cartridge and imaging unit, and then firmly shaking the imaging unit. As a last resort, replace the imaging unit and resend the print job.
What to do if Lexmark Printer says 'Defective flash detected'?
If your Lexmark printer displays a 'Defective flash detected' message, you can replace the defective flash memory card. Alternatively, you can press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Print Technology | Laser |
| Recommended Monthly Page Volume | 30, 000 pages |
| Connectivity | USB, Ethernet |
| Supported Media Sizes | A6 |
| Media Types Supported | Cardstock, Envelopes, Labels |
| Duplex Printing | Standard |
| Operating System Compatibility | Windows, Linux |
| Maximum Paper Size | A4 |
Explains the function of each button and display element on the printer's control panel.
Provides instructions for installing internal hardware and memory components like cards and hard disks.
Covers network setup for Ethernet and wireless connections, including configuration details.
Provides tips and best practices for loading paper correctly to prevent paper jams.
Explains how to interpret jam messages and identify locations to clear jams.
Lists common printer messages and provides initial steps to resolve them.
Guides for resolving issues related to paper jams and feeding errors.
Troubleshooting steps for common print quality issues like jagged text or clipped images.
To Next Page
