What to do if Lexmark Printer displays 'Disk near full. Securely clearing disk space'?
If your Lexmark printer displays 'Disk near full. Securely clearing disk space', you can press on the printer control panel to clear the message. You can also delete fonts, macros, and other data stored on the printer hard disk, or install a printer hard disk with a higher capacity.
What to do if Lexmark MS710 displays 'Insufficient memory to support Resource Save feature'?
If your Lexmark printer displays 'Insufficient memory to support Resource Save feature', you can press on the printer control panel to disable Resource Save, clear the message, and continue printing. Alternatively, you can install additional printer memory.
What to do if Lexmark Printer says 'Defective flash detected'?
If your Lexmark printer displays a 'Defective flash detected' message, you can replace the defective flash memory card. Alternatively, you can press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What to do if my Lexmark MS710 Printer says 'Maintenance kit low'?
If your Lexmark printer displays a 'Maintenance kit low' message, you may need to order a maintenance kit. If necessary, press on the printer control panel to clear the message and continue printing.
How to resolve 'Load Manual Feeder with [custom string] [orientation]' on Lexmark Printer?
If your Lexmark printer displays a 'Load Manual Feeder' message, load the feeder with the correct size and type of paper. You can also press on the printer control panel to clear the message and continue printing, or cancel the current job.
What to do if my Lexmark Printer says 'Unsupported disk'?
If your Lexmark printer displays an 'Unsupported disk' message, it means an unsupported disk has been inserted. Remove the unsupported disk and install a supported one.
What to do if Lexmark Printer displays 'Change [paper source] to [custom string] load [orientation]'?
If your Lexmark printer displays a 'Change [paper source]' message, load the correct size and type of paper in the tray, and then press on the printer control panel. You can also cancel the print job.
What to do if my Lexmark Printer says 'Cartridge low'?
If your Lexmark printer indicates that the cartridge is low, you may need to order a new toner cartridge. You can press on the printer control panel to clear the message and continue printing if necessary.
What to do if Lexmark MS710 Printer says 'Check tray [x] connection'?
If your Lexmark printer displays a 'Check tray connection' message, try turning the printer off and then back on. If the error persists, turn off the printer, unplug the power cord, remove the specified tray, reattach it, reconnect the power cord, and then turn the printer back on. If the error occurs again, repeat the above steps and then contact customer support. You can also press on the printer control panel to clear the message and continue printing.
What to do if Lexmark MS710 Printer displays 'Load staples'?
If your Lexmark printer is showing a 'Load staples' message, you should replace or insert the specified staple cartridge in the finisher. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the print job.
Explains the function of each button and display element on the printer's control panel.
Provides instructions for installing internal hardware and memory components like cards and hard disks.
Covers network setup for Ethernet and wireless connections, including configuration details.
Provides tips and best practices for loading paper correctly to prevent paper jams.
Explains how to interpret jam messages and identify locations to clear jams.
Lists common printer messages and provides initial steps to resolve them.
Guides for resolving issues related to paper jams and feeding errors.
Troubleshooting steps for common print quality issues like jagged text or clipped images.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Print Technology | Laser |
| Recommended Monthly Page Volume | 30, 000 pages |
| Connectivity | USB, Ethernet |
| Supported Media Sizes | A6 |
| Media Types Supported | Cardstock, Envelopes, Labels |
| Duplex Printing | Standard |
| Operating System Compatibility | Windows, Linux |
| Maximum Paper Size | A4 |
To Next Page
