Reports
Menu Settings Page
This report generates a list of the Configuration menu settings and the value of each setting.
To print the Menu settings page from the Configuration menu:
1 From the Configuration menu, navigate to:
Reports > Menu Settings Page
2 Depending on the printer model, press OK or touch to print the page, or press X to return to the Configuration
menu.
Event Log
This generates a printed report of the events detailed in the Print log. See “Print Log” on page 340.
To print the Event log from the Configuration menu:
1 From the Configuration menu, navigate to:
Reports > Event Log
2 Press X to return to the Configuration menu.
Size sensing
This setting controls whether the printer automatically registers the size of paper installed in an input source with size
sourcing.
Paper source Size sensing
250‑sheet Tray X
500‑sheet Tray X
2100‑sheet Tray X
MP Feeder
Duplex
When set to Auto, a size-sensing input option automatically reports the size of media that it contains to the device.
When Off, the printer ignores the size reported by the size sensing hardware. The media size can be set by the control
panel or the data stream.
To change the size sensing setting:
1 From the Configuration menu, navigate to Size sensing.
2 Select Auto or Off, and depending on the printer model, press OK or touch .
3 Press Back or X to return to the Configuration menu.
4063
Service menus
343
To Next Page
Loading...
