Mailbox controller PCBA removal
1 Remove the mailbox top cover. See “Mailbox top cover removal” on page 688.
2 Remove the mailbox left cover. See “Mailbox left cover removal” on page 696.
3 Disconnect all cables (J1B, J5, J4D, J2A, J4C, J2B, J4B, J2C, J4A, J8, J1A, J3B, J7, J6, J12, and J3T), and then remove
the two screws (A) from the controller PCBA.
4063
Repair information
707
To Next Page
Loading...
