4 Slide the paper guide until it lightly rests against the edge of the paper.
5 Do either of the following to clear the message and continue printing:
• For touch‑screen printer models, touch or Done.
• For non‑touch‑screen printer models, select Next > > Clear the jam, press OK > .
250 paper jam messages
Error code Description Action
250.02 The input sensor detected a late feed during
a pick retry from the MPF media tray
Go to “Sensor (input) early arriving jam service check” on
page 71.
250.06 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
250.08 Multifeed detected from MPF, excess media
flushed
Press Continue to print using the next available media.
250.10 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
250.13 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
250.14 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
250.17 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
250.18 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
Go to “Sensor (input) never-arriving jam from MPF media tray
service check” on page 122.
4063
Diagnostic information
121
To Next Page
Loading...
