Lexmark MS711 - HCOE Tray Shaft Removal

6 Pry the right side of the diverter to release, and then remove the diverter.
HCOE tray shaft removal
Note: This is not a FRU.
1 Remove the HCOE left cover. See “HCOE rear door removal” on page 585.
2 Remove the HCOE right cover. See “HCOE left cover removal” on page 589.
3 Remove the HCOE tray pinion. See “HCOE tray pinion removal” on page 598.
4063
Repair information
614