Drawer pick roller removal
1 Remove the media tray. See “250/550-sheet media tray and drawer assembly removal” on page 514.
2 Move the rollers downward (1), then push the latches inward (2), and pull out the pick roller (3).
Sensor (pick roll position) removal
1 Remove the media tray. See “250/550-sheet media tray and drawer assembly removal” on page 514.
2 Remove the pick roller. See “Drawer pick roller removal ” on page 516.
3 Release the latches (A), then pull away the sensor.
4063
Repair information
516
To Next Page
Loading...
