Lexmark MS711 - 7-Inch Tilting Display Removal

8 Remove the four screws (B) securing the 4.3” tilting display to the control panel.
9 Remove the 4.3” tilting display from the control panel.
7‑inch tilting display removal
1 Remove the control panel left bezel. See “Control panel left bezel removal” on page 446.
2 Remove the control panel. See “Control panel removal (4.3‑inch screen, 7‑inch screen)” on page 428.
3 Remove the control panel latch. See “Control panel latch removal” on page 445.
4 Remove the control panel front cover. See “Control panel front cover removal” on page 443.
4063
Repair information
419