Lexmark MS711 - Tamper Motor (Right) Removal; Tamper Motor (Left) Removal

Tamper motor (right) removal
1 Remove the stapler left cover. See “Stapler left cover removal” on page 630.
2 Remove the stapler right cover. See “Stapler right cover removal” on page 624.
3 Remove the stapler top cover. See “Stapler top cover removal” on page 635.
4 Disconnect the tamper motor cable (A).
5 Remove the two screws (B), then remove the motor.
Tamper motor (left) removal
1 Remove the stapler left cover. See “Stapler left cover removal” on page 630.
2 Remove the stapler right cover. See “Stapler right cover removal” on page 624.
3 Remove the stapler top cover. See “Stapler top cover removal” on page 635.
4 Disconnect the tamper motor cable (A).
4063
Repair information
656