Need help?Do you have a question about the Lexmark MS315 and is the answer not in the manual?
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | - ppm |
| Printing colors | Black |
| Maximum duty cycle | 60000 pages per month |
| Recommended duty cycle | 500 - 4000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS |
| Paper input type | Paper tray |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 850 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 3 |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| Maximum ISO A-series paper size | A4 |
| Mobile printing technologies | - |
| Supported network protocols (IPv4) | TCP/IP, AppleTalk |
| Supported network protocols (IPv6) | TCP/IP, TCP, UDP |
| Standard interfaces | Ethernet, Parallel, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Sound pressure level (printing) | 53 dB |
| Display | LCD |
| Certification | ENERGY STAR, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER |
| Product color | White |
| Display diagonal | 2.4 \ |
| Power consumption (printing) | 560 W |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2 |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Package depth | 431.8 mm |
| Package height | 472.4 mm |
| Package weight | 16034.5 g |
Weight and Dimensions| Depth | 398.8 mm |
|---|---|
| Width | 261.62 mm |
| Height | 381 mm |
Overview of troubleshooting steps, including initial checks and the power-on reset sequence.
Procedures for diagnosing and fixing common print quality problems.
Specific procedures for clearing 200 paper jams, involving front door access.
Procedures for clearing 201 paper jams, related to the standard bin.
Procedures for clearing 202 paper jams, involving the rear door.
Procedures for clearing 23y paper jams, related to duplex clearing via tray 1.
Procedures for clearing 241 paper jams, involving tray 1.
Procedures for clearing 242 paper jams, involving tray 2.
Procedure for replacing the controller board and control panel.
Steps to restore printer configuration using the Service Restore Tool.
How to load zip files from the Service Restore Tool.
Procedure for updating printer firmware using a flash drive.
Steps to export eSF solutions and settings before controller board replacement.
Mechanical adjustments for the printhead assembly.
Procedure for removing the toner cartridge smart chip contact.
Procedure for removing the cartridge plunger.
Procedure for removing the MPF assembly.
Procedure for removing the front door.
Procedure for removing the front input guide.
Procedure for removing the separator pad.
Procedure for removing the duplex unit.
Procedure for removing the duplex sensor and input sensor.
Procedure for removing the toner density sensor.
Procedure for removing the trailing edge sensor.
Procedure for removing the ACM assembly.
Procedure for removing the fuser unit.
Procedure for removing the laser scanning unit (LSU).
Procedure for removing the ACM assembly.
Explanation of the EP process step: Clean.
To Next Page
