What to do if Lexmark MS312dn Printer says defective flash memory?
To resolve the 'Defective flash memory' error on your Lexmark Printer, replace the defective flash memory card. You can also press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What to do if my Lexmark MS312dn Printer says cartridge nearly low?
To resolve a 'Cartridge nearly low' message on your Lexmark Printer, you can press on the printer control panel to clear the message and continue printing, if necessary.
What to do if my Lexmark Printer says cartridge low?
To resolve a 'Cartridge low' message on your Lexmark Printer, you may need to order a toner cartridge. If necessary, you can press on the printer control panel to clear the message and continue printing.
How to fix unformatted flash detected on Lexmark MS312dn Printer?
To resolve the 'Unformatted flash detected' error on your Lexmark Printer, you can press on the printer control panel to stop the defragmentation and continue printing. You can also format the flash memory device.
How to fix replace imaging unit, 0 estimated pages remain on Lexmark MS312dn?
Replace the imaging unit to clear the message and continue printing.
What to do if Lexmark MS312dn Printer says insufficient memory, some held jobs were deleted?
To resolve the 'Insufficient memory, some Held Jobs were deleted' message on your Lexmark Printer, press on the printer control panel to clear the message.
How to fix standard network software error on Lexmark MS312dn?
To address the 'Standard network software error' on your Lexmark Printer, you can press on the printer control panel to confirm. You can also try unplugging the router, waiting for 30 seconds, and then plugging it back in. Additionally, turn off the printer and then turn it back on. You might also need to update the network firmware in the printer or the print server. For more information, visit the Lexmark website.
How to fix replace unsupported cartridge on Lexmark MS312dn?
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
What to do if Lexmark Printer says imaging unit very low?
To resolve the 'Imaging unit very low, [x] estimated pages remain' message on your Lexmark Printer, you may need to replace the imaging unit very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if Lexmark Printer says reinstall missing or unresponsive imaging unit?
To address the 'Reinstall missing or unresponsive imaging unit' message on your Lexmark Printer, first check if the imaging unit is missing and install it if it is. If the imaging unit is already installed, remove and then reinstall it.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Duplex printing mode | Auto/Manual |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | 35 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 16 ppm |
| Printing colors | Black |
| Maximum duty cycle | 50000 pages per month |
| Recommended duty cycle | 500 - 2500 pages per month |
| Number of print cartridges | - |
| Page description languages | Microsoft XPS, PCL 5e, PCL 6, PostScript 3, PPDS |
| Paper input type | Paper tray |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 850 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 3 |
| Multi-Purpose tray input capacity | 50 sheets |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Paper tray media weight (imperial) | 16 - 24 lbs |
| Multi-Purpose Tray media weight (imperial) | 16 - 43 lbs |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Security algorithms | 802.1x RADIUS, HTTPS, LEAP, MD5, PEAP, SSL/TLS |
| Mobile printing technologies | Apple AirPrint |
| Supported network protocols (IPv4) | TCP/IP IPv4 AppleTalk |
| Supported network protocols (IPv6) | TCP/IP IPv6 TCP UDP |
| Standard interfaces | Ethernet, Parallel, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | 1 |
| Internal memory | 128 MB |
| Processor model | 2-Core |
| Noise level (idle) | 15 dB |
| Processor frequency | 800 MHz |
| Sound pressure level (printing) | 53 dB |
| Sound pressure level (duplex printing) | 52 dB |
| Display | LCD |
| Certification | ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, Customs Union EAC, SII, TER |
| Product color | Black, White |
| Display number of lines | 2 lines |
| Power consumption (printing) | 520 W |
| Sustainability certificates | ENERGY STAR |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2 |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Package depth | 472 mm |
| Package width | 432 mm |
| Package weight | 15807 g |
Weight and Dimensions| Depth | 381 mm |
|---|---|
| Width | 398.7 mm |
| Height | 261.6 mm |
| Weight | 14016 g |
To Next Page
