EasyManuals Logo

Lexmark MS312dn User Manual

Lexmark MS312dn
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Adding available options in the print driver
For Windows users
1 Open the printers folder.
2 Select the printer you want to update, and then do the following:
For Windows 7 or later, select Printer properties.
For earlier versions, select Properties.
3 Navigate to the Configuration tab, and then select Update Now Ask Printer.
4 Apply the changes.
For Macintosh users
1 From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.
2 Navigate to the list of hardware options, and then add any installed options.
3 Apply the changes.
Networking
Notes:
Purchase a MarkNet
TM
N8352 wireless network adapter before setting up the printer on a wireless
network. For information on the compatible adapter, go to
www.lexmark.com.
A Service Set Identifier (SSID) is a name assigned to a wireless network. Wired Equivalent Privacy (WEP),
Wi-Fi Protected Access (WPA), WPA2, and 802.1X - RADIUS are types of security used on a network.
Preparing to set up the printer on an Ethernet network
To configure your printer to connect to an Ethernet network, organize the following information before you
begin:
Note: If your network automatically assigns IP addresses to computers and printers, continue on to installing
the printer.
A valid, unique IP address for the printer to use on the network
The network gateway
The network mask
A nickname for the printer (optional)
Note: A printer nickname can make it easier for you to identify your printer on the network. You can
choose to use the default printer nickname, or assign a name that is easier for you to remember.
You will need an Ethernet cable to connect the printer to the network and an available port where the printer
can physically connect to the network. Use a new network cable when possible to avoid potential problems
caused by a damaged cable.
Additional printer setup 19

Table of Contents

Other manuals for Lexmark MS312dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS312dn and is the answer not in the manual?

Lexmark MS312dn Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Duplex printing modeAuto/Manual
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)35 ppm
Duplex print speed (black, normal quality, A4/US Letter)16 ppm
Printing colorsBlack
Maximum duty cycle50000 pages per month
Recommended duty cycle500 - 2500 pages per month
Number of print cartridges-
Page description languagesMicrosoft XPS, PCL 5e, PCL 6, PostScript 3, PPDS
Paper input typePaper tray
Total input capacity300 sheets
Total output capacity150 sheets
Maximum input capacity850 sheets
Total number of input trays2
Maximum number of input trays3
Multi-Purpose tray input capacity50 sheets
Envelopes sizes7 3/4, 9, 10, DL
Paper tray media typesCard stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Paper tray media weight (imperial)16 - 24 lbs
Multi-Purpose Tray media weight (imperial)16 - 43 lbs
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Security algorithms802.1x RADIUS, HTTPS, LEAP, MD5, PEAP, SSL/TLS
Mobile printing technologiesApple AirPrint
Supported network protocols (IPv4)TCP/IP IPv4 AppleTalk
Supported network protocols (IPv6)TCP/IP IPv6 TCP UDP
Standard interfacesEthernet, Parallel, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Internal memory128 MB
Processor model2-Core
Noise level (idle)15 dB
Processor frequency800 MHz
Sound pressure level (printing)53 dB
Sound pressure level (duplex printing)52 dB
DisplayLCD
CertificationICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, Customs Union EAC, SII, TER
Product colorBlack, White
Display number of lines2 lines
Power consumption (printing)520 W
Sustainability certificatesENERGY STAR
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Package depth472 mm
Package width432 mm
Package weight15807 g
Weight and Dimensions IconWeight and Dimensions
Depth381 mm
Width398.7 mm
Height261.6 mm
Weight14016 g

Related product manuals