How to fix 'Defective flash detected' error on Lexmark MS510 Printer?
If your Lexmark printer displays a 'Defective flash detected' message, replace the defective flash memory card. Alternatively, select Continue on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What to do if Lexmark Printer says 'Close front door'?
If your Lexmark printer displays a 'Close front door' message, simply close the front door of the printer.
How to resolve 'Cartridge nearly low' message on Lexmark Printer?
When your Lexmark printer shows a 'Cartridge nearly low' message, you can select Continue on the printer control panel to clear the message and continue printing, if necessary.
What to do if Lexmark Printer displays 'Remove paper from standard output bin'?
If your Lexmark printer shows 'Remove paper from standard output bin', remove the paper stack from the standard bin. The printer should automatically detect the removal and resume printing. If the message persists, select Continue on the printer control panel.
What does 'Memory full' mean on Lexmark MS510 and how to fix it?
If your Lexmark printer displays a 'Memory full' message, select Cancel job on the printer control panel to clear the message. Alternatively, install additional printer memory.
What to do if Lexmark MS510 Printer displays 'Replace unsupported cartridge'?
If your Lexmark printer displays a 'Replace unsupported cartridge' message, remove the toner cartridge and install a supported one to clear the message and continue printing.
How to resolve 'Serial option [x] error' on Lexmark Printer?
If your Lexmark printer displays a 'Serial option [x] error' message, make sure that the serial cable is properly connected and is the correct one. Also, ensure that the serial interface parameters are set correctly on both the printer and computer. You can also select Continue on the printer control panel to continue printing, or turn the printer off and then back on.
What to do if Lexmark Printer displays 'Standard network software error'?
If your Lexmark printer displays a 'Standard network software error' message, you can select Continue on the printer control panel to continue printing. Alternatively, turn the printer off and then back on, or update the network firmware in the printer or print server.
What to do if Lexmark Printer displays 'Imaging unit low'?
If your Lexmark printer shows an 'Imaging unit low' message, you may need to order a new imaging unit. If you want to continue printing, select Continue on the printer control panel to clear the message.
How do I resolve a 'Reinstall missing or unresponsive cartridge' error on my Lexmark MS510 Printer?
First, check if the toner cartridge is missing and install it if it is. If the cartridge is already installed, remove it and then reinstall it. If the issue persists, replace the toner cartridge.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 45 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 800 MHz |
| Monthly Duty Cycle | Up to 100, 000 pages |
| Connectivity | USB 2.0, Gigabit Ethernet |
| Memory | 256 MB (Expandable to 1280 MB) |
| Output Capacity | Up to 250 sheets |
| Duplex Printing | Automatic |
| Media Sizes Supported | A4, A5, A6, JIS B5, Executive, Legal, Letter, Statement |
| Supported Operating Systems | Windows, Mac, Linux |
| Input Capacity | Up to 650 sheets |
| Weight | 31 lbs |
Details how to install various internal hardware and memory options like cards and hard disks.
Instructions for printing documents, forms, and adjusting toner darkness.
Configuration settings for TCP/IP network protocols.
Configuration options for wireless network connections.
Lists part numbers for various Lexmark toner cartridges by region.
Instructions for replacing consumables like toner cartridges and imaging units.
Tips on preventing paper jams by proper paper loading and selection.
Explains common printer error messages and their meanings.
Troubleshoots issues related to incompatible toner and imaging units.
Guidance for handling non-Lexmark supplies and potential risks.
Steps to replace an unsupported toner cartridge with a supported one.
A step-by-step guide to troubleshoot when the printer does not respond.
Troubleshooting steps when the printer display is blank.
Steps to troubleshoot when the printer cannot detect an installed internal option.
Troubleshooting steps for issues related to printer trays.
Troubleshooting steps for common paper jamming issues.
General troubleshooting for various printing issues.
A comprehensive guide to troubleshoot when print jobs do not output.
Troubleshooting steps for prints with jagged or uneven character edges.
General troubleshooting for various print quality issues like streaks and voids.
Troubleshooting steps for repeating defects like lines or spots on prints.
Troubleshooting steps for prints that are too dark.
Troubleshooting steps for prints that are too light.
Troubleshooting steps when the printer prints blank pages.
Troubleshooting steps for skewed print output.
Troubleshooting steps when the printer prints solid black pages.
Troubleshooting steps when the Embedded Web Server fails to open.
To Next Page