What to do if Lexmark Printer displays 'Error reading USB hub. Remove hub.'?
If your Lexmark printer displays an 'Error reading USB hub. Remove hub.' message, an unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
What to do if Lexmark MS510dtn says 'Close front door'?
If your Lexmark printer displays a 'Close front door' message, simply close the front door of the printer.
How to resolve 'Cartridge nearly low' message on Lexmark Printer?
When your Lexmark printer shows a 'Cartridge nearly low' message, you can select Continue on the printer control panel to clear the message and continue printing, if necessary.
What to do if Lexmark MS510dtn displays 'Replace imaging unit, 0 estimated pages remain'?
Replace the imaging unit to clear the message and continue printing.
What to do if Lexmark MS510dtn Printer displays 'Cartridge very low, [x] estimated pages remain'?
If your Lexmark printer displays a 'Cartridge very low, [x] estimated pages remain' message, you may need to replace the toner cartridge very soon. If necessary, select Continue on the printer control panel to clear the message and continue printing.
What to do if Lexmark MS510dtn Printer displays 'Maintenance kit very low, [x] estimated pages remain'?
You may need to replace the maintenance kit very soon. If necessary, select Continue on the printer control panel to clear the message and continue printing.
How to resolve 'Serial option [x] error' on Lexmark MS510dtn Printer?
If your Lexmark printer displays a 'Serial option [x] error' message, make sure that the serial cable is properly connected and is the correct one. Also, ensure that the serial interface parameters are set correctly on both the printer and computer. You can also select Continue on the printer control panel to continue printing, or turn the printer off and then back on.
What to do if Lexmark MS510dtn Printer displays 'Standard network software error'?
If your Lexmark printer displays a 'Standard network software error' message, you can select Continue on the printer control panel to continue printing. Alternatively, turn the printer off and then back on, or update the network firmware in the printer or print server.
What to do if Lexmark Printer displays 'Replace cartridge, 0 estimated pages remain'?
Replace the toner cartridge to clear the message and continue printing.
How do I resolve a 'Reinstall missing or unresponsive cartridge' error on my Lexmark MS510dtn?
First, check if the toner cartridge is missing and install it if it is. If the cartridge is already installed, remove it and then reinstall it. If the issue persists, replace the toner cartridge.
General| Printer Type | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | 100, 000 pages |
| Connectivity | USB, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
| Duplex Printing | Yes |
| Standard Memory | 256 MB |
| Duty Cycle (Monthly) | 100, 000 pages |
| Maximum Paper Size | 8.5 x 14 inches |
| Network Connectivity | Ethernet |
| Mobile Printing | Yes |
| Additional Paper Tray Capacity | 550 sheets |
To Next Page
