Need help?Do you have a question about the Lexmark MS517dn and is the answer not in the manual?
General| Cables included | AC |
|---|---|
| Cartridge(s) included | Yes |
| Included cartridge capacity (black) | 3000 pages |
| Color | No |
| Print technology | Laser |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | 42 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 18 ppm |
| Processor cores | 2 |
| Noise level (idle) | 15 dB |
| Processor frequency | 800 MHz |
| Maximum internal memory | 1280 MB |
| Sound pressure level (printing) | 55 dB |
| Sound pressure level (duplex printing) | 54 dB |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Paper tray media weight | 60 - 120 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Total input capacity | 350 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 2000 sheets |
| Maximum number of input trays | 5 |
| Multi-Purpose tray input capacity | 100 sheets |
| USB connector | USB Type-B |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Wireless LAN |
| USB 2.0 ports quantity | 1 |
| Wi-Fi | - |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | LEAP, MD5, MSCHAPv2, PEAP, SNMPv3, SSL/TLS, TTLS |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols (IPv4) | TCP/IP IPv4, AppleTalk |
| Supported network protocols (IPv6) | TCP/IP IPv6, TCP, UDP |
| Package depth | 472 mm |
| Package width | 432 mm |
| Package height | 380 mm |
| Package weight | 16700 g |
| Power consumption (off) | 0.5 W |
| Power consumption (ready) | 7 W |
| Power consumption (printing) | 600 W |
| Energy Star Typical Electricity Consumption (TEC) | 2.1 kWh/week |
| Display | LCD |
| Certification | ENERGY STAR, Blue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER |
| Product color | Gray |
| Display diagonal | 2.4 \ |
| Printing colors | Black |
| Country of origin | China |
| Maximum duty cycle | 120000 pages per month |
| Recommended duty cycle | 1500 - 14000 pages per month |
| Page description languages | Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PPDS, PostScript 3 |
| Sustainability certificates | Blue Angel, ENERGY STAR |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Authentication method | 802.1x |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 399 mm |
| Height | 263 mm |
Identifies the specific Lexmark printer models covered by this manual.
Specifies the machine type identifier for the printers.
Lists the various models included within this service manual.
Provides essential safety warnings and classifications related to laser products.
Details general safety precautions, potential hazards, and handling instructions for product maintenance.
Documents revisions and updates made to the service manual over time.
Details the available printer models, their configurations, and machine types.
Provides guidance on selecting, using, and storing paper for optimal print quality and performance.
Explains the types of memory used and the data stored by the printer.
Lists the essential tools needed for performing service procedures on the printer.
Provides initial checks and sequences for diagnosing printer issues.
Guides users through diagnosing and resolving common print quality problems.
Details procedures for avoiding and clearing various types of paper jams.
Explains common printer messages and provides troubleshooting steps for each.
Lists and explains various hardware error codes and their corresponding service actions.
Describes the functions of the printer's control panel buttons and displays.
Provides an overview of all available menus and their options.
Details how to access and use the diagnostic functions for testing printer components.
Explains how to perform specific hardware tests for components like the panel and buttons.
Covers printer configuration settings, including defaults and regional options.
Describes how to display, print, and clear the printer's event log for diagnostics.
Provides essential safety and handling guidelines before removing printer parts.
Highlights critical warnings and procedures for replacing key electronic components.
Details the process of restoring printer settings and solutions after component replacement.
Provides step-by-step instructions for removing components from the left side of the printer.
Explains the procedure for removing the main drive gearbox assembly.
Covers the critical information and procedures for replacing controller boards.
Details the steps required to safely remove and replace the transfer roll.
Guides on how to remove and identify the type of Laser Scanning Unit (LSU).
Provides instructions for safely removing the printer's power supply unit.
Step-by-step guide for removing the index sensor component.
Details the procedure for removing the toner density sensor.
Identifies the locations of external components on the printer's front and rear views.
Provides intervals and checks for inspecting printer parts for damage, cleaning, or replacement.
Outlines the maintenance kits required at specific page counts for optimal printer performance.
Explains how to reset the maintenance counter after replacing a maintenance kit.
Provides instructions for cleaning the printer's exterior and printhead lenses.
Explains the column headings and abbreviations used in the parts catalog.
Illustrates and lists parts related to the printer's cover assemblies.
Details the components and removal procedures for the first electronics assembly.
Details the components and removal procedures for the second electronics assembly.
Illustrates and lists parts associated with the printer's frame structure.
Details the parts related to optional paper trays and feeders.
Lists the part numbers and contents of various maintenance kits.
Lists the available power cord part numbers and their regional specifications.
Lists various miscellaneous parts such as adapters, cards, and memory modules.
Documents the power consumption characteristics of the printer in various operating modes.
Details the voltage and frequency requirements for low-voltage and high-voltage models.
Specifies the required space around the printer for proper operation and ventilation.
Defines the recommended temperature, humidity, and altitude for printer operation.
Lists the types of internal hardware options available for the printer.
Describes the various media input and output options available for the printer.
Explains the Power-On Reset sequence and hardware integrity checks performed by the printer.
Details the component functions and media flow within the printer's paper path.
Describes the operation and components of the Multipurpose Feeder.
Explains the process of single-sided printing, including media alignment and toner transfer.
Describes the process of double-sided printing and how media is fed for both sides.
Details the function of key media handling components like the main drive gearbox and ACM.
Identifies and explains the function of essential printer components like sensors and motors.
Explains the electrophotographic process, including charge, expose, develop, transfer, and clean steps.
Provides a list of acronyms used throughout the service manual with their full meanings.
To Next Page
