EasyManuals Logo

Lexmark MS517dn User Manual

Lexmark MS517dn
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #186 background imageLoading...
Page #186 background image
Printed Page Count
The value of this setting gauges the amount of usage on the printer. The value of the Printed Page Count setting
will equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset
to zero.
Note: The value of the setting cannot be changed manually.
Permanent Page Count
The value of this setting indicates the total amount of pages that have been printed. After all print tests have
been completed, the value will reset to zero.
Note: The Permanent Page Count value cannot be reset.
Processor ID
This is a 16digit hexadecimal value representing the ID of the processor on the controller card.
Engine Setting [x]
These settings are used by Engine code ECs to fix field problems. The value of [x] is any value from 1 to 16.
Edge to Edge
When set to On, this shifts all four margins (top, bottom, left, and right) to the physical edge of the page (printable
area of a supported paper size). This feature does not work in PPDS emulation.
Par S Strobe Adj
This setting adjusts the factory setting for the amount of time the strobe is sampled to determine that valid data
is available on the parallel port.
Each time the value is increased by one, the strobe is sampled 50 nanoseconds longer. Each time the value is
decreased by 1, the strobe is sampled 50 nanoseconds less than the default value. The range of values is
between -4 and +6, in increments of one. A value of zero indicates no change is made from the factory setting.
EP Setup
EP Defaults
This setting restores each printer setting listed in EP SETUP to its factory default value. Sometimes this is used
to help correct print quality problems.
To restore the EP defaults:
1 From the Diagnostics menu, navigate to:
EP Setup > EP Defaults
2 Select Restore to restore the default values, or press X to exit without changing the settings.
4514-6xx
Service menus
186

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS517dn and is the answer not in the manual?

Lexmark MS517dn Specifications

General IconGeneral
Cables includedAC
Cartridge(s) includedYes
Included cartridge capacity (black)3000 pages
ColorNo
Print technologyLaser
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)42 ppm
Duplex print speed (black, normal quality, A4/US Letter)18 ppm
Processor cores2
Noise level (idle)15 dB
Processor frequency800 MHz
Maximum internal memory1280 MB
Sound pressure level (printing)55 dB
Sound pressure level (duplex printing)54 dB
Envelopes sizes7 3/4, 9, 10, DL
Paper tray media typesCard stock, Envelopes, Labels, Plain paper, Transparencies
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Total input capacity350 sheets
Total output capacity150 sheets
Maximum input capacity2000 sheets
Maximum number of input trays5
Multi-Purpose tray input capacity100 sheets
USB connectorUSB Type-B
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Wi-Fi-
Cabling technology10/100/1000Base-T(X)
Security algorithmsLEAP, MD5, MSCHAPv2, PEAP, SNMPv3, SSL/TLS, TTLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv4)TCP/IP IPv4, AppleTalk
Supported network protocols (IPv6)TCP/IP IPv6, TCP, UDP
Package depth472 mm
Package width432 mm
Package height380 mm
Package weight16700 g
Power consumption (off)0.5 W
Power consumption (ready)7 W
Power consumption (printing)600 W
Energy Star Typical Electricity Consumption (TEC)2.1 kWh/week
DisplayLCD
CertificationENERGY STAR, Blue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER
Product colorGray
Display diagonal2.4 \
Printing colorsBlack
Country of originChina
Maximum duty cycle120000 pages per month
Recommended duty cycle1500 - 14000 pages per month
Page description languagesMicrosoft XPS, PCL 5e, PCL 6, PDF 1.7, PPDS, PostScript 3
Sustainability certificatesBlue Angel, ENERGY STAR
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Authentication method802.1x
Weight and Dimensions IconWeight and Dimensions
Depth382 mm
Width399 mm
Height263 mm

Related product manuals