Security Settings Help
Miscellaneous Security Settings
4
Confidential Print
Disk Wiping
4
Security Audit Log
Set Date and Time
General Settings
Flash Drive Menu
4
Print Settings
Print All Guides
Print Quality
Media Guide
Print Defects Guide
Menu Map
Information Guide
Connection Guide
Moving Guide
Supplies Guide
1
This menu appears only in touch‑screen printer models.
2
Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
3
Depending on the printer setup, this menu item appears as Standard Network or Network [x].
4
This feature is available only in select printer models.
Diagnostics menu
Entering the Diagnostics menu
1 Turn
o
the printer.
2 Press and hold 3 and 6 while turning on the printer.
Release the buttons when the splash screen appears.
Registration
These settings adjust the margins of the black plane.
To set the Registration:
1 Print a Quick test page.
a From the Diagnostics menu, navigate to:
Registration > Quick Test
b Retain this page to determine the changes you need to make to the margin settings. The alignment
diamonds in the margins should touch the margins of the page.
The Quick test page contains the following information:
• Printer registration settings
• Code levels
• Alignment diamonds at the top, bottom, and each side
• Horizontal lines for skew adjustment
• General printer information, including current page count, installed memory, processor speed, serial
number, engine ID, and system card ID
2 Change the value of any of the margin settings.
4514-6xx
Service menus
176