EasyManuals Logo

Lexmark MS510 Manual

Lexmark MS510
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Print Quality Guide
If the solutions here do not correct the problem, then contact customer support. You may have a printer part that requires
adjustment or replacement.
Characters have jagged or uneven edges
Action Yes No
Step 1
a Print a font sample list to check if the fonts you are using are supported by
the printer.
1 From the printer control panel, navigate to:
Menus > Reports > Print Fonts
2 Select PCL Fonts or PostScript Fonts.
b Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2. Select a font that is
supported by the printer.
Step 2
Check if the fonts installed on the computer are supported by the printer.
Are the fonts installed on the computer supported by the printer?
The problem is solved. Contact
customer
support.
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Print Quality Guide
Page 1 of 19

Other manuals for Lexmark MS510

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS510 and is the answer not in the manual?

Lexmark MS510 Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 45 ppm
Print Resolution1200 x 1200 dpi
Processor Speed800 MHz
Monthly Duty CycleUp to 100, 000 pages
ConnectivityUSB 2.0, Gigabit Ethernet
Memory256 MB (Expandable to 1280 MB)
Output CapacityUp to 250 sheets
Duplex PrintingAutomatic
Media Sizes SupportedA4, A5, A6, JIS B5, Executive, Legal, Letter, Statement
Supported Operating SystemsWindows, Mac, Linux
Input CapacityUp to 650 sheets
Weight31 lbs

Related product manuals