Lexmark MS510 Manual

Action Yes No
Step 3
a Depending on your operating system, specify the paper type, texture and
weight from Printing Preferences or from the Print dialog.
b Resend the print job.
Is the print still too dark?
Go to step 4. The problem is solved.
Step 4
Check if the paper loaded in the tray has texture or rough finishes.
Are you printing on textured or rough paper?
From the printer control
panel, change the
texture settings in the
Paper Texture menu to
match the paper you are
printing on.
Go to step 5.
Step 5
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you use it.
b Resend the print job.
Is the print still too dark?
Go to step 6. The problem is solved.
Step 6
Replace the imaging unit, and then resend the print job.
Is the print still too dark?
Contact
customer
support.
The problem is solved.
Print is too light
Action Yes No
Step 1
a From the Quality menu on the printer control panel, increase the toner
darkness.
Note: 8 is the factory default setting.
b Resend the print job.
Is the print still too light?
Go to step 2. The problem is solved.
Print Quality Guide
Page 7 of 19

Lexmark MS510 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 100, 000 pages
Connectivity	USB 2.0, Gigabit Ethernet
Memory	256 MB (Expandable to 1280 MB)
Output Capacity	Up to 250 sheets
Duplex Printing	Automatic
Media Sizes Supported	A4, A5, A6, JIS B5, Executive, Legal, Letter, Statement
Supported Operating Systems	Windows, Mac, Linux
Input Capacity	Up to 650 sheets
Weight	31 lbs