Lexmark MS510 Manual

Action Yes No
Step 5
a Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store paper in its
original wrapper until you use it.
b Resend the print job.
Do print irregularities still appear?
Go to step 6. The problem is solved.
Step 6
Replace the imaging unit, and then resend the print job.
Do print irregularities still appear?
Contact
customer
support at
http://support.lexmark.
com or your service
representative.
The problem is solved.
Print is too dark
Action Yes No
Step 1
a From the Quality menu on the printer control panel, reduce the toner
darkness.
Note: 8 is the factory default setting.
b Resend the print job.
Is the print still too dark?
Go to step 2. The problem is solved.
Step 2
a From the printer control panel, set the paper type, texture and weight in the
Paper menu to match the paper loaded in the tray.
b Resend the print job.
Is the tray set to the type, texture, and weight of the paper loaded?
Go to step 3. Do one or more of the
following:
• Specify the paper
type, texture, and
weight from the tray
settings to match the
paper loaded in the
tray.
• Change the paper
loaded in the tray to
match the paper
type, texture and
weight specified in
the tray settings.
Print Quality Guide
Page 6 of 19

Lexmark MS510 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 100, 000 pages
Connectivity	USB 2.0, Gigabit Ethernet
Memory	256 MB (Expandable to 1280 MB)
Output Capacity	Up to 250 sheets
Duplex Printing	Automatic
Media Sizes Supported	A4, A5, A6, JIS B5, Executive, Legal, Letter, Statement
Supported Operating Systems	Windows, Mac, Linux
Input Capacity	Up to 650 sheets
Weight	31 lbs