Lexmark MS510 Manual

Action Yes No
Step 1
Load paper with the correct paper type and weight in the tray.
Is paper with the correct paper type and weight loaded in the tray?
Go to step 2. Load paper with the
correct paper type and
weight in the tray.
Step 2
From the printer control panel, set the paper type and weight in the Paper menu
to match the paper loaded in the tray.
Is the tray set to the type and weight of the paper loaded?
Go to step 3. Change the paper loaded
in the tray to match the
paper type and weight
specified in the tray
settings.
Step 3
a Depending on your operating system, specify the paper type and weight
from Printing Preferences or from the Print dialog.
b Resend the print job.
Do shadow images still appear on prints?
Go to step 4. The problem is solved.
Step 4
Replace the imaging unit, and then resend the print job.
Do shadow images still appear on prints?
Contact
customer
support.
The problem is solved.
Skewed print
) )
ABCDE
ABCDE
ABCDE
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions for the
size of the paper loaded.
b Resend the print job.
Is the print still skewed?
Go to step 2. The problem is solved.
Step 2
a Check if you are printing on a paper that is supported by the tray.
b Resend the print job.
Is the print still skewed?
Contact
customer
support.
The problem is solved.
Print Quality Guide
Page 11 of 19

Lexmark MS510 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 100, 000 pages
Connectivity	USB 2.0, Gigabit Ethernet
Memory	256 MB (Expandable to 1280 MB)
Output Capacity	Up to 250 sheets
Duplex Printing	Automatic
Media Sizes Supported	A4, A5, A6, JIS B5, Executive, Legal, Letter, Statement
Supported Operating Systems	Windows, Mac, Linux
Input Capacity	Up to 650 sheets
Weight	31 lbs