Lexmark MS510 Manual

Action Yes No
Step 1
a From the Quality Menu on the printer control panel, decrease the toner
darkness.
Note: 8 is the factory default setting.
b Resend the print job.
Did the gray background disappear from the prints?
The problem is solved. Go to step 2.
Step 2
Reinstall the imaging unit and the toner cartridge.
a Remove the toner cartridge.
b Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light can cause print
quality problems.
c Install the imaging unit, and then the cartridge.
d Resend the print job.
Did the gray background disappear from the prints?
The problem is solved. Go to step 3.
Step 3
Replace the imaging unit, and then resend the print job.
Did the gray background disappear from the prints?
The problem is solved. Contact
customer
support.
Incorrect margins on prints
ABCD
ABCD
ABCD
Action Yes No
Step 1
a Move the width and length guides in the tray to the correct positions for the
paper size loaded.
b Resend the print job.
Are the margins correct?
The problem is solved. Go to step 2.
Print Quality Guide
Page 3 of 19

Lexmark MS510 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 45 ppm
Print Resolution	1200 x 1200 dpi
Processor Speed	800 MHz
Monthly Duty Cycle	Up to 100, 000 pages
Connectivity	USB 2.0, Gigabit Ethernet
Memory	256 MB (Expandable to 1280 MB)
Output Capacity	Up to 250 sheets
Duplex Printing	Automatic
Media Sizes Supported	A4, A5, A6, JIS B5, Executive, Legal, Letter, Statement
Supported Operating Systems	Windows, Mac, Linux
Input Capacity	Up to 650 sheets
Weight	31 lbs