3 Remove the separator roller assembly.
Left side removals
• “Left cover removal” on page 489
• “Controller board removal” on page 492
• “Controller board access cover removal” on page 493
• “Controller board access shield removal” on page 494
• “Fuser drive motor removal” on page 494
• “Main cooling fan removal” on page 496
• “Main drive motor removal” on page 497
• “Media feeder removal” on page 498
• “PCBA housing removal” on page 500
• “Sensor (control panel interlock) removal” on page 501
• “Sensor (pick roller position) removal” on page 502
• “Toner add motor removal” on page 503
4063
Repair information
488
To Next Page
Loading...
