Appendix A: Printer specifications
• “Power specifications” on page 881
• “Operating clearances” on page 882
• “Acoustics” on page 882
• “Environment” on page 882
• “Processor” on page 883
• “Security reset jumper” on page 883
Power specifications
The average nominal power requirements for the base printer configuration are shown in the following table (power
levels are shown in watts):
Printing States MS710 MS711 MS810dn/de MS811 MS812dn/de
Off 0.1 W 0.1 W 0.1 W 0.1 W
Hibernate 0.52 W 0.5 W 0.5 W 0.5 W
Sleep State 5.2 W 4.1 / 5.5W 4.1 4.1 / 7 W
Ready Mode
Tier 1
Tier 2
110 W
75 W
55 W / 60 W
30 W
55 W
30 W
55 W / 60 W
30 W
Continuous printing
1‑sided
2‑sided
780 W
575 W
700 W
500 W
770 W
560 W
830 W
6300 W
Max. (Avg) current while printing:
100 - 110 Volts
115 - 127 Volts
220 - 240 Volts
10.0 A
9.0 A
4.6 A
11.5 A
10.0 A
5.0 A
Printer Fuser Ceramic Slab 925 W 1185 W
Maximum current shown in amp ergs.
Notes:
• Using a power converter or inverter is not recommended.
• Only duplex models are Energy Star qualified
• All models ship with Sleep Mode set to On.
• The default time-out to Sleep mode is 30 minutes.
4063
Appendix A: Printer specifications
881
To Next Page
Loading...
