How to fix 'Disk must be formatted for use in this device' error on Lexmark MS711?
If your Lexmark printer displays the message 'Disk must be formatted for use in this device,' select 'Format disk' from the printer control panel to format the printer hard disk and clear the message.
How do I resolve 'Load [paper source] with [custom string] [orientation]' on my Lexmark MS711 Printer?
If your Lexmark printer displays a 'Load [paper source]' message, load the indicated tray or feeder with the correct size and type of paper. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the current job.
What does 'Cartridge, imaging unit mismatch' mean on my Lexmark MS711 and how to fix it?
If your Lexmark printer displays a 'Cartridge, imaging unit mismatch' error, check if both the toner cartridge and imaging unit are MICR (Magnetic Ink Character Recognition) or non-MICR supplies. Change either the toner cartridge or the imaging unit, so that both are either MICR or non-MICR.
How to resolve 'Load Manual Feeder with [custom string] [orientation]' on Lexmark Printer?
If your Lexmark printer displays a 'Load Manual Feeder' message, load the feeder with the correct size and type of paper. You can also press on the printer control panel to clear the message and continue printing, or cancel the current job.
What to do if Lexmark MS711 displays 'Insufficient memory to support Resource Save feature'?
If your Lexmark printer displays 'Insufficient memory to support Resource Save feature', you can press on the printer control panel to disable Resource Save, clear the message, and continue printing. Alternatively, you can install additional printer memory.
What to do if there are 'Too many bins attached' to my Lexmark MS711?
If your Lexmark printer indicates 'Too many bins attached', turn off the printer, unplug the power cord, remove the extra bins, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on.
What to do if Lexmark MS711 Printer displays 'Change [paper source] to [custom string] load [orientation]'?
If your Lexmark printer displays a 'Change [paper source]' message, load the correct size and type of paper in the tray, and then press on the printer control panel. You can also cancel the print job.
What to do if Lexmark MS711 says 'Check tray [x] connection'?
If your Lexmark printer displays a 'Check tray connection' message, try turning the printer off and then back on. If the error persists, turn off the printer, unplug the power cord, remove the specified tray, reattach it, reconnect the power cord, and then turn the printer back on. If the error occurs again, repeat the above steps and then contact customer support. You can also press on the printer control panel to clear the message and continue printing.
What to do if Lexmark Printer displays 'Load staples'?
If your Lexmark printer is showing a 'Load staples' message, you should replace or insert the specified staple cartridge in the finisher. Alternatively, you can press on the printer control panel to clear the message and continue printing, or cancel the print job.
How to fix 'Incorrect paper size, open [paper source]' on Lexmark Printer?
If your Lexmark printer displays an 'Incorrect paper size' message, try these steps: Load the correct size of paper in the tray. You can also press on the printer control panel to clear the message and print using a different tray. Check the tray length and width guides to ensure the paper is loaded properly. Also, verify that the correct paper size and type are specified in Print Properties, the Print dialog, or the Paper menu on the printer control panel. If the MP Feeder Size is set to Universal, ensure the paper is large enough for the data being printed. As a last resort, cancel the print job.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Operating Systems Supported | Windows, macOS, Linux |
| Print Technology | Laser |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 1.5 GB |
| Output Capacity | 250 sheets |
| Hard Drive | Optional |
| Energy Star Certified | Yes |
| Printer Type | Monochrome Laser |
| Connectivity | USB, Ethernet |
| Duplex Printing | Automatic |
| Print Languages | PostScript 3 |
| Dimensions (W x D x H) | 15.7 x 17.5 x 15.7 inches |
To Next Page
