To Next PageTo Next Page
What to do if my Lexmark MS810 displays 'Complex page, some data may not have printed [39]'?
If your Lexmark printer displays the message 'Complex page, some data may not have printed [39]', you have a few options: * From the printer control panel, select Continue to ignore the message and continue printing. * Cancel the current print job. * Install additional printer memory.
What to do when Lexmark Printer says 'Change [paper source] to [custom string]'?
When your Lexmark printer displays the message 'Change [paper source] to [custom string]', load the correct paper size and type in the tray. Verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper. Alternatively, you can cancel the print job.
What does 'Disk corrupted' mean on my Lexmark Printer and how to fix it?
If your Lexmark printer displays the message 'Disk corrupted', select Format disk to reformat the printer hard disk and clear the message.
How to resolve 'Network [x] software error [54]' on Lexmark MS810 Printer?
To resolve a 'Network [x] software error [54]' on your Lexmark printer, from the printer control panel, select Continue to continue printing. If the problem persists, turn off the printer, wait for about 10 seconds, and then turn the printer back on.
What to do if my Lexmark MS810 displays 'Fuser kit early wear warning [81.xx]'?
If your Lexmark printer displays the message 'Fuser kit early wear warning [81.xx]', order a replacement fuser. From the printer control panel, select Continue to clear the message and continue printing.
How to fix Lexmark MS810 when it says 'Incorrect paper size, open [paper source] [34]'?
If your Lexmark printer displays the message 'Incorrect paper size, open [paper source] [34]', try the following: * Load the correct size of paper in the tray. * From the printer control panel, select Continue to clear the message and print using a different tray. * Check the tray length and width guides and make sure the paper is loaded properly in the tray. * Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog. * Make sure the paper size and type are specified in the Paper menu on the printer control panel. * Make sure that the paper size is correctly set. * Cancel the print job.
What does 'Error reading USB drive. Remove USB.' mean on Lexmark MS810?
If your Lexmark printer displays the message 'Error reading USB drive. Remove USB.', it indicates that an unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
What to do if my Lexmark MS810 displays 'Insert hole punch box'?
If your Lexmark printer displays the message 'Insert hole punch box', insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
What to do if my Lexmark MS810 Printer displays 'Insert staple cartridge'?
If your Lexmark printer displays the message 'Insert staple cartridge', insert a staple cartridge, or select Continue to clear the message and print without using the staple finisher.
What does 'Cartridge very low [88.xy]' mean for Lexmark MS810?
If your Lexmark printer displays the message 'Cartridge very low [88.xy]', it indicates that you may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Speed | Up to 55 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Monthly Duty Cycle | Up to 300, 000 pages |
| Processor Speed | 800 MHz |
| Standard Memory | 512 MB |
| Maximum Memory | 2560 MB |
| Connectivity | USB, Ethernet |
| Duplex Printing | Standard |
| Media Types Supported | Card Stock, Envelopes, Labels, Plain Paper, Transparencies |
| Maximum Paper Size | Legal |
| Operating System Compatibility | Windows, Mac, Linux |
| Input Capacity | 650 pages (Standard) |
| Maximum Paper Input | 4400 pages |
