EasyManuals Logo

Lexmark MS810 Moving Guide

Lexmark MS810
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Moving Guide
Before moving the printer
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer
damage:
Turn off the printer, and then unplug the power cord from the electrical outlet.
Disconnect all cords and cables from the printer.
If two or more optional finishers are installed, then remove the finishers individually from the printer.
Notes:
Make sure to remove the topmost finisher first.
To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.
If the printer does not have a caster base, then remove the optional trays.
Note: Slide the latch on the right side of the printer toward the front of the printer until it clicks into place.
Moving Guide
Page 1 of 3

Other manuals for Lexmark MS810

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS810 and is the answer not in the manual?

Lexmark MS810 Specifications

General IconGeneral
Print TechnologyMonochrome Laser
Print SpeedUp to 55 ppm
Print Resolution1200 x 1200 dpi
Monthly Duty CycleUp to 300, 000 pages
Processor Speed800 MHz
Standard Memory512 MB
Maximum Memory2560 MB
ConnectivityUSB, Ethernet
Duplex PrintingStandard
Media Types SupportedCard Stock, Envelopes, Labels, Plain Paper, Transparencies
Maximum Paper SizeLegal
Operating System CompatibilityWindows, Mac, Linux
Input Capacity650 pages (Standard)
Maximum Paper Input4400 pages

Related product manuals