What to do if my Lexmark MS812de Printer displays 'Empty the hole punch box'?
If your Lexmark printer displays the message 'Empty the hole punch box', empty the hole punch box. Then, reinsert the hole punch box into the finisher, and touch Continue to clear the message.
What to do if my Lexmark MS812de says 'Load staples'?
If your Lexmark printer shows a 'Load staples' message, try these steps: 1. Replace or insert the specified staple cartridge in the finisher. 2. Alternatively, select Continue to clear the message and continue printing. 3. If you prefer to cancel the print job, select Cancel job.
What to do if my Lexmark MS812de displays 'Close door or insert cartridge'?
If your Lexmark printer displays the message 'Close door or insert cartridge', it means the toner cartridge is either missing or not installed correctly. To resolve this, insert the cartridge properly, and then ensure all doors and covers are securely closed.
How to resolve 'Check tray [x] connection' error on Lexmark MS812de?
To resolve a 'Check tray [x] connection' error on your Lexmark printer, follow these steps: 1. Turn off the printer, and then turn it back on. 2. If the error appears again: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the specified tray. * Reattach the tray. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on. 3. If the error persists: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the tray. * Contact customer support. 4. To clear the message and resume the job, select Continue on the printer control panel.
What to do if Lexmark Printer displays 'Load [paper source] with [custom string] [paper orientation]'?
If your Lexmark printer displays the message 'Load [paper source] with [custom string] [paper orientation]', load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. Alternatively, cancel the current job.
What does 'Cartridge very low [88.xy]' mean for Lexmark MS812de Printer?
If your Lexmark printer displays the message 'Cartridge very low [88.xy]', it indicates that you may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if my Lexmark MS812de Printer displays 'Insert hole punch box'?
If your Lexmark printer displays the message 'Insert hole punch box', insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
What to do if my Lexmark MS812de Printer displays 'Insert staple cartridge'?
If your Lexmark printer displays the message 'Insert staple cartridge', insert a staple cartridge, or select Continue to clear the message and print without using the staple finisher.
What to do when Lexmark Printer says 'Change [paper source] to [custom string]'?
When your Lexmark printer displays the message 'Change [paper source] to [custom string]', load the correct paper size and type in the tray. Verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper. Alternatively, you can cancel the print job.
What does 'Maintenance kit low [80.xy]' mean on my Lexmark Printer?
If your Lexmark printer displays 'Maintenance kit low [80.xy]' message, you may need to order a maintenance kit. For more information, contact customer support. If necessary, select Continue to clear the message and continue printing.
General| Color | No |
|---|---|
| Duplex printing | Yes |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 4 s |
| Print speed (black, normal quality, A4/US Letter) | 66 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 40 ppm |
| Printing colors | Black |
| Maximum duty cycle | 300000 pages per month |
| Recommended duty cycle | 5000 - 50000 pages per month |
| Number of print cartridges | 1 |
| Page description languages | Microsoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS |
| Security algorithms | 802.1x RADIUS, EAP-TLS, EAP-TTLS, LEAP, MD5, PEAP |
| Supported network protocols (IPv4) | TCP/IP IPv4, AppleTalk |
| Supported network protocols (IPv6) | TCP/IP IPv6, TCP, UDP |
| Maximum internal memory | 2560 MB |
| Sound power level (standby) | 32 dB |
| Sound pressure level (printing) | 58 dB |
| Total input capacity | 650 sheets |
| Total output capacity | 550 sheets |
| Maximum input capacity | 4400 sheets |
| Total number of input trays | 2 |
| Maximum number of input trays | 6 |
| Envelopes sizes | 7 3/4, 9, 10, B5, C5, DL |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Paper tray media weight | 60 - 176 g/m² |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Parallel, Serial (RS-232), Wireless LAN |
| USB 2.0 ports quantity | 3 |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Linux operating systems supported | Fedora 14, Fedora 15, RedHat EL Linux 4.0 U5, RedHat EL Linux 4.0 U6, RedHat EL Linux 4.0 U7, RedHat EL Linux 5.0, RedHat EL Linux 5.1, RedHat EL Linux 5.2, RedHat EL Linux 5.3, SuSE Linux 10, SuSE Linux 10.2, SuSE Linux 10.3, SuSE Linux 11 |
| Other operating systems supported | Novell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Power consumption (printing) | - W |
| Package depth | 537 mm |
| Package width | 615 mm |
| Package height | 563 mm |
| Package weight | 27770 g |
| Sustainability certificates | ENERGY STAR |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Display | LCD |
| Product color | Black, Grey |
Weight and Dimensions| Depth | 510 mm |
|---|---|
| Width | 425 mm |
| Height | 419 mm |
To Next Page
