What to do if my Lexmark MS810de displays 'Empty the hole punch box'?
If your Lexmark printer displays the message 'Empty the hole punch box', empty the hole punch box. Then, reinsert the hole punch box into the finisher, and touch Continue to clear the message.
What to do if my Lexmark Printer says 'Load staples'?
If your Lexmark printer shows a 'Load staples' message, try these steps: 1. Replace or insert the specified staple cartridge in the finisher. 2. Alternatively, select Continue to clear the message and continue printing. 3. If you prefer to cancel the print job, select Cancel job.
What to do if my Lexmark MS810de displays 'Close door or insert cartridge'?
If your Lexmark printer displays the message 'Close door or insert cartridge', it means the toner cartridge is either missing or not installed correctly. To resolve this, insert the cartridge properly, and then ensure all doors and covers are securely closed.
How to resolve 'Check tray [x] connection' error on Lexmark MS810de Printer?
To resolve a 'Check tray [x] connection' error on your Lexmark printer, follow these steps: 1. Turn off the printer, and then turn it back on. 2. If the error appears again: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the specified tray. * Reattach the tray. * Connect the power cord to a properly grounded electrical outlet. * Turn the printer back on. 3. If the error persists: * Turn off the printer. * Unplug the power cord from the electrical outlet. * Remove the tray. * Contact customer support. 4. To clear the message and resume the job, select Continue on the printer control panel.
What to do if Lexmark MS810de Printer displays 'Load [paper source] with [custom string] [paper orientation]'?
If your Lexmark printer displays the message 'Load [paper source] with [custom string] [paper orientation]', load the tray or feeder with the correct size and type of paper. To use the tray that has the correct size or type of paper, select Finished loading paper on the printer control panel. Alternatively, cancel the current job.
What does 'Cartridge very low [88.xy]' mean for Lexmark Printer?
If your Lexmark printer displays the message 'Cartridge very low [88.xy]', it indicates that you may need to replace the toner cartridge very soon. For more information, see the “Replacing supplies” section of the User’s Guide.
What to do if my Lexmark MS810de displays 'Insert hole punch box'?
If your Lexmark printer displays the message 'Insert hole punch box', insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
What to do if my Lexmark Printer displays 'Insert staple cartridge'?
If your Lexmark printer displays the message 'Insert staple cartridge', insert a staple cartridge, or select Continue to clear the message and print without using the staple finisher.
What to do when Lexmark Printer says 'Change [paper source] to [custom string]'?
When your Lexmark printer displays the message 'Change [paper source] to [custom string]', load the correct paper size and type in the tray. Verify the paper size and type settings are specified in the Paper menu on the printer control panel, and then select Finished changing paper. Alternatively, you can cancel the print job.
What does 'Maintenance kit low [80.xy]' mean on my Lexmark MS810de Printer?
If your Lexmark printer displays 'Maintenance kit low [80.xy]' message, you may need to order a maintenance kit. For more information, contact customer support. If necessary, select Continue to clear the message and continue printing.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Print Resolution (Black) | 1200 x 1200 dpi |
| Processor Speed | 1.2 GHz |
| Memory | 512 MB |
| Standard Memory | 512 MB |
| Maximum Memory | 2 GB |
| Print Speed (Black) | 55 pages per minute |
| Print Speed (Letter, Black) | 55 pages per minute |
| Standard Paper Capacity | 650 pages |
| Standard Paper Input Capacity | 650 pages |
| Maximum Paper Input Capacity | 4400 pages |
| Connectivity | USB, Ethernet |
| Duplex Printing | Standard |
To Next Page
