Lexmark MS810 User Manual (English)

Other manuals for Lexmark MS810

User Guide364 pages

Manual19 pages

Quick Reference31 pages

Printing Guide16 pages

Supplies Guide3 pages

Moving Guide3 pages

Questions and Answers:

L
Leslie FranklinAug 31, 2025
How to fix check tray connection on Lexmark Printer?
- L
  Latoya WilliamsAug 31, 2025
  To address the 'Check tray [x] connection' message on your Lexmark printer, try the following: 1. Turn the printer off, then turn it back on. 2. If that doesn't work, turn off the printer, unplug the power cord from the electrical outlet, remove the specified tray, reattach the tray, connect the power cord to a properly grounded electrical outlet, and then turn the printer back on. 3. You can also select Continue on the printer control panel.
J
Joseph SilvaAug 25, 2025
What to do if my Lexmark Printer says 'Load staples'?
- R
  Robin BurtonAug 25, 2025
  If your Lexmark printer shows a 'Load staples' message, try these steps: 1. Replace or insert the specified staple cartridge in the finisher. 2. Alternatively, select Continue to clear the message and continue printing. 3. If you prefer to cancel the print job, select Cancel job.
Q
qhendersonAug 25, 2025
What to do if my Lexmark MS810 displays 'Close door or insert cartridge'?
- M
  Michael PattersonAug 26, 2025
  If your Lexmark printer displays the message 'Close door or insert cartridge', it means the toner cartridge is either missing or not installed correctly. To resolve this, insert the cartridge properly, and then ensure all doors and covers are securely closed.
N
Nicholas GutierrezSep 5, 2025
How to fix install tray [x] message on Lexmark Printer?
- T
  Tony ZimmermanSep 5, 2025
  To resolve the 'Install Tray [x]' message on your Lexmark printer, install the specified tray: Turn off the printer, unplug the power cord from the electrical outlet, install the specified tray, connect the power cord to a properly grounded electrical outlet, and turn the printer back on. You can also cancel the print job or reset the active bin.
Y
Yvette WillisSep 10, 2025
How to fix incompatible tray [x] on Lexmark MS810?
- M
  Melissa LopezSep 10, 2025
  Remove the specified tray, or select Continue from the printer control panel to clear the message and continue printing without using the specified tray.
S
Scott DavisSep 3, 2025
What to do if Lexmark MS810 Printer says maintenance kit very low?
- C
  Carrie BeardSep 3, 2025
  If your Lexmark printer displays 'Maintenance kit very low', you may need to replace the maintenance kit very soon. If necessary, select Continue on the printer control panel to clear the message and continue printing.
K
kellybowenAug 29, 2025
What to do if my Lexmark MS810 displays 'Insert hole punch box'?
- G
  Gerald KennedyAug 29, 2025
  If your Lexmark printer displays the message 'Insert hole punch box', insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
J
Jamie KochSep 10, 2025
How to fix insert hole punch box on Lexmark MS810 Printer?
- W
  William GeorgeSep 10, 2025
  Insert the hole punch box into the finisher, and then select Continue on the printer control panel to clear the message.
R
Richard KnightSep 7, 2025
What to do if Lexmark Printer says insufficient memory to collate job?
- B
  bensontamaraSep 7, 2025
  If your Lexmark printer displays 'Insufficient memory to collate job', select Continue from the printer control panel to print the part of the job already stored and begin collating the rest of the print job. You can also cancel the current print job.
M
Matthew RodriguezAug 27, 2025
What does 'Maintenance kit low [80.xy]' mean on my Lexmark Printer?
- S
  Shannon NicholsonAug 27, 2025
  If your Lexmark printer displays 'Maintenance kit low [80.xy]' message, you may need to order a maintenance kit. For more information, contact customer support. If necessary, select Continue to clear the message and continue printing.

Lexmark MS810 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 55 ppm
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 300, 000 pages
Processor Speed	800 MHz
Standard Memory	512 MB
Maximum Memory	2560 MB
Connectivity	USB, Ethernet
Duplex Printing	Standard
Media Types Supported	Card Stock, Envelopes, Labels, Plain Paper, Transparencies
Maximum Paper Size	Legal
Operating System Compatibility	Windows, Mac, Linux
Input Capacity	650 pages (Standard)
Maximum Paper Input	4400 pages

Lexmark MS810 Setup Sheet

Other manuals for Lexmark MS810

Questions and Answers:

Lexmark MS810 Specifications