• Flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
4 Load the paper or specialty media.
Notes:
• Do not force paper or specialty media into the multipurpose
feeder.
• Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
Overfilling may cause paper jams.
• Load paper, transparencies, and card stock with the
recommended printable side faceup and the top edge entering
the printer first. For more information on loading
transparencies, see the packaging that the transparencies came
in.
Note: When loading A6‑size paper, make sure the
multipurpose feeder extender rests lightly against the edge
of the paper so that the last few sheets of paper remain in
place.
• Load letterhead faceup with the top edge entering the printer
first. For two‑sided (duplex) printing, load letterhead facedown
with the bottom edge entering the printer first.
• Load envelopes with the flap on the left side facedown.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5
To Next Page
Loading...
