Lexmark MX432 - Page 123

Advanced Imaging
Menu item Description
Color Balance
Cyan ‑ Red (0*)
Magenta ‑ Green (0*)
Ye l l o w ‑ Blue (0*)
Adjust the color intensity for cyan, magenta, and yellow.
Auto Color Detect
Color Sensitivity (5*)
Area Sensitivity (5*)
E‑mail Bit Depth (1 bit*)
Minimum Scan Resolution (300 dpi*)
Configure the auto color detection setting.
Contrast
Best for Content*
0–5
Specify the contrast for the scanned image.
Background Removal
Level (0*)
Remove the background color or image noise from the original document.
Scan Edge to Edge
O*
On
Scan the original document from edge to edge.
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item Description
Max E‑mail Size
0–65535 (0*)
Set the allowable file size for each e‑mail.
Size Error Message Specify an error message that the printer sends when an e‑mail exceeds
its allowable file size.
Note: You can type up to 1024 characters.
Limit Destinations Limit sending of e‑mail only to the specified list of domain name.
Note: Use a comma to separate each domain.
Send Me a Copy
Never appears*
On by Default
O by Default
Always On
Send a copy of the e‑mail to yourself.
Allow self e‑mails only
O*
On
Set the printer to send e‑mails to yourself only.
Note: An asterisk (*) next to a value indicates the factory default setting.
Use printer menus 123