Action Yes No
Step 5
a Replace the imaging unit.
b Print the document.
Is the print mottled?
Contact
customer
support.
The problem is
solved.
Paper curl
Action Yes No
Step 1
a Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the toner cartridge is not supported, then install a
supported one.
b Print the document.
Is the paper curled?
Go to step 2. The problem is
solved.
Step 2
a Adjust the guides in the tray to the correct position for the paper
loaded.
b Print the document.
Is the paper curled?
Go to step 3. The problem is
solved.
Step 3
a Depending on your operating system, specify the paper size
and paper type from the Printing Preferences or Print dialog.
Notes:
• Make sure that the settings match the paper loaded.
• You can also change the settings from the printer control
panel.
b Print the document.
Is the paper curled?
Go to step 4. The problem is
solved.
Troubleshooting 211
To Next Page
Loading...
