Lexmark MX622 - Creating a Fax Destination Shortcut; Changing the Fax Resolution; Adjusting the Fax Darkness; Printing a Fax Log

Creating a fax destination shortcut
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 55.
1 From the home screen, touch Fax > To.
2 Enter the recipient number, and then touch Done.
3 Touc h .
4 Create a shortcut.
Changing the fax resolution
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 55.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touc h Resolution, and then adjust the setting.
4 Send the fax.
Adjusting the fax darkness
Note: Make sure that fax is configured. For more information, see “Setting up the printer to fax” on page 55.
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
3 Touc h Darkness, and then adjust the setting.
4 Send the fax.
Printing a fax log
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 55.
1 From the home screen, touch Settings > Reports > Fax.
2 To uc h Fax Job Log or Fax Call Log.
Blocking junk faxes
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 55.
1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2 Set Block No Name Fax to On.
Faxing 65