Lexmark MX622adhe - Using Shortcut Center; Using Display Customization; Configuring Eco-Settings; Using Customer Support

Using Shortcut Center
1 From the home screen, touch Shortcut Center, and then select a printer function.
2 To uc h Create Shortcut, and then configure the settings.
3 Tou ch Save, and then type a unique shortcut name.
4 Apply the changes.
Using Display Customization
Before using the application, make sure to do the following:
• Access the Embedded Web Server, and then configure the application.
• Enable and
configure
Slideshow Settings and Wallpaper Settings.
Changing the wallpaper image
1 From the home screen, touch Change Wallpaper.
2 Select an image to use.
3 Apply the changes.
Running a slide show from a
flash
drive
1 Insert a
flash
drive into the USB port.
2 From the home screen, touch Slideshow.
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the
flash
drive again to view the images.
Configuring Eco‑Settings
1 From the home screen, touch Eco‑Settings.
2
Configure
the Eco‑Mode settings or schedule a power-saving mode.
3 Apply the changes.
Using Customer Support
1 From the home screen, touch Customer Support.
2 Print or e‑mail the information.
Note: For information on
configuring
the application settings, see the Customer Support Administrator’s
Guide.
Setting up and using the home screen applications 19