Lexmark MX810dfe - Understanding the Basic Functions of the Scanner

Configured model
CAUTION—TIPPING HAZARD: Floor-mounted
configurations
require additional furniture for stability.
You must use either a printer stand or printer base if you are using multiple input options. If you
purchased a multifunction printer (MFP) that scans, copies, and faxes, then you may need additional
furniture. For more information, see
www.lexmark.com/multifunctionprinters.
4
5
1
2
3
Hardware option Alternative hardware option
1 Staple finisher
• 4‑bin mailbox
•
Oset
stacker
• Staple, hole punch finisher
2 550‑sheet trays 2100‑sheet tray
3 Caster base None
4 2100‑sheet tray 550‑sheet trays
5 4‑bin mailbox
• Staple finisher
• Staple, hole punch
finisher
• Oset stacker
When using optional trays:
• Always use a caster base when the printer is
configured
with a 2100‑sheet tray.
• The 2100‑sheet tray must always be at the bottom of a configuration.
• You cannot use an optional 550‑sheet tray if the 2100‑sheet tray is installed.
• A maximum of three optional trays may be configured with the printer.
• The printer supports only one
finisher
at a time.
Understanding the basic functions of the scanner
• Make quick copies or set the printer to perform
specific
copy jobs.
• Send a fax using the printer control panel.
Learning about the printer 13