EasyManua.ls Logo

Lexmark MX810dfe - Solving Scanner Problems

Lexmark MX810dfe
389 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Action Yes No
Step 2
Decrease the incoming fax transmission speed.
a Open a Web browser, and then type the printer IP address in
the address field.
Notes:
View the printer IP address on the printer home screen.
The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it
to load the Web page correctly.
Print a network setup page or menu settings page, and
then locate the IP address in the TCP/IP section.
b Click Settings > Fax Settings > Analog Fax Setup.
c In the Max Speed menu, click one of the following:
2400
4800
9600
14400
33600
d Click Submit, and then resend the fax.
Is the fax print quality satisfactory?
The problem is
solved.
Go to step 3.
Step 3
Replace the toner cartridge.
When Cartridge low [88.xy] appears, replace the
cartridge, and then resend the fax.
Is the fax print quality satisfactory?
The problem is
solved.
Contact
customer
support.
Solving scanner problems
“Cannot scan from a computer” on page 356
“Partial document or photo scans” on page 356
“Poor scanned image quality” on page 356
“Scan job was not successful” on page 357
“Scanner unit does not close” on page 358
“Scanning takes too long or freezes the computer” on page 358
“The scanner does not respond” on page 359
Troubleshooting 355

Table of Contents

Related product manuals