To Next PageTo Next PageWhat to do if Lexmark All in One Printer won't send or receive analog faxes?
If you're unable to send or receive analog faxes, check the following: * Make sure the telephone cable is properly connected to the port on the control unit and to the phone jack. * Verify the phone line is analog.
What to do if a red exclamation point appears over the Copy icon on Lexmark All in One Printer?
If a red exclamation point appears over the Copy icon, try these steps: 1. Touch the Copy icon and follow the on-screen instructions. 2. Ensure the printer is plugged in and turned on. 3. Check that the Ethernet cables are correctly connected. 4. Turn off both the printer and the control unit, then turn them back on.
How to fix Lexmark All in One Printer touch screen when it is blank?
If the touch screen is blank and unresponsive, try the following: * Check that the control unit is plugged in. * Verify the electrical outlets have power. * Ensure all cables and cords are properly connected. * Turn the control unit off and then back on.
General| Printer Type | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB, Parallel, Ethernet |
| Standard Output Capacity | 250 sheets |
| Weight | 58 lbs |
| Monthly Duty Cycle | 150000 pages |
| Operating Systems Supported | Windows |
