Notes:
• You cannot modify a virtual device from the command line.
• You cannot change a virtual device type after creation. If you need to do this, delete the existing device and then
re-create it.
Removing a virtual device
1 Click Device Manager.
2 Select the virtual devices you want to remove.
3 Click Remove.
Note: A virtual device cannot be removed if a print queue is currently associated with it. A notification message
appears if you try to remove a device that has queues associated with it.
You can also remove a virtual device from the command line using the following command:
# /usr/lexprint/bin/rmdevice -d device_name
Changing a print queue to print to a different printer
1 Open the printer driver.
2 Right-click the print queue icon.
3 Select Change Device.
4 Select a device from the Device Manager table.
If you do not see your printer listed in the table, you can create a new virtual device by clicking Add Device.
5 Click OK.
Note: You cannot change a print queue's virtual device from the command line.
Removing a print queue
From the icon view
1 Right-click the icon for the printer you want to delete.
2 Select Delete.
From the detail view
1 Select any number of the print queues listed in the table that you want to delete.
2 Right-click, and then select Delete.
From the printer driver
1 Click Remove Print Queue.
2 Select the print queues you want to delete.
30
To Next Page
Loading...
Need help?
General
