Navigating menus using the touch screen
Use To
1 Left arrow
Scroll left.
2 Right arrow
Scroll right.
3Accept Save your setting.
4 Up arrow
Scroll up.
5 Scroll bar
Scroll up and down the menu list.
6 Down arrow
Scroll down.
Tips:
• Use your fingers to navigate the screen. The touch screen does not work if you use other tools or
devices to navigate.
• Drag the scroll bar or touch the arrows until the menu or setting that you want appears on the display.
• Flick the screen by dragging your finger up or down the screen, and then lifting your finger off the
screen. To navigate to the next or previous screen, flick sideways. It will have the same effect as
selecting the left or right arrow.
• To confirm a setting or select a menu or item, touch it.
• If necessary, touch OK or Accept after making a selection or changing a setting.
Note: All the instructions in this guide start from the home screen. If you are not on the home screen,
then touch
.
For example, to navigate to Paper Type and select the default paper type setting:
1 Touch > Paper Setup > Paper Type.
Note: For select printer models with two paper trays installed, touch
, select the paper tray, and
then touch Paper Setup > Paper Type.
2 Scroll up or down (using the scroll bar or arrows, or by flicking the screen up or down) to view the list
of paper types.
3 Select a paper type setting by touching it, and then touch Accept to save the setting.
Using memory cards and flash drives
Using a memory card or flash drive with the printer
Insert a memory card into the card slot or a flash drive into the USB port
About your printer 16
To Next Page
Loading...
Need help?
General