Lexmark T630 Quick Reference Guide

Page 1 of 8
Quick Reference
Operator panel
Press Menu to:
• Enter the menus from the Ready state.
• Scroll through menus or values.
• Increase or decrease a numerical value.
• Display the Job Menu while the printer is busy.
Press Select to:
• Select the item on the second line of the display.
• Save the selection as a new default setting.
Press Return to return to the previous menu level.
Press Go to:
• Exit printer menus and return to the Ready state.
• Clear messages.
Press Stop to temporarily stop all print activity without losing data.
Printing this quick reference
1 Press Menu until you see Help Menu, and then press Select.
2 When you see Quick Reference, press Select. The Quick Reference prints.
Note: This Quick Reference is also included on the Publications CD that shipped with your printer.
1
Menu
2
Select
3
Return
4
Go
5
Stop
6

Lexmark T630 Specifications

General

Print Technology	Laser
Print Speed	Up to 35 ppm
Resolution	1200 x 1200 dpi
Operating System Compatibility	Windows, Mac, Linux, UNIX
Connectivity	Parallel, USB
First Print Out Time	Less than 8.5 seconds
Duplex Printing	Optional
Media Sizes	A4, A5, Letter, Legal, Executive, Folio
Paper Capacity	100-sheet multipurpose feeder
Weight	43 lbs (19.5 kg)