Page 4 of 8
Common printer messages
Message Actions
Change Tray x
The printer is
requesting a different
size or type of print
media than what is
loaded.
• Remove the currently loaded print
media from the specified tray, and
then load the requested print media.
• Press
Select to clear the message
and print on the print media currently
loaded in the tray.
• Cancel the current job.
Load Manual
The printer is ready for
print media to be
inserted into the
multipurpose feeder.
• Load the multipurpose feeder with
the print media specified on the
second line of the display.
• Press
Select or Go to ignore the
manual feed request and print on
print media already installed in one of
the trays.
• Cancel the current job.
Waiting
The printer has
received data to print
but is waiting for a
command or
additional data.
• Press
Go to print the contents of the
buffer.
• Cancel the current job.
Not Ready
The printer is not
ready to process data.
Press
Go to ready the printer to receive
jobs.
Flushing Buffer
The printer is
discarding the current
print job.
• Wait for the message to clear.
• Sometimes this message means the
driver data did not match what the
printer was expecting. If the situation
recurs, try printing from another
printer driver.
To Next Page
Loading...
